TIGHTChecker

Everything Leaks…

TIGHTChecker is an ultrasound solution designed to verify the tightness of closed volumes.

Focused

Tightness integrity is an issue that plagues every industry. TIGHTChecker is an ultrasound solution focused on pinpointing leaks in any volume. Cars, trains, airplanes, buildings, cleanrooms… TIGHTChecker checks them all.

Simple

TIGHTChecker is so easy to use. Simply open the box, position the T-SONIC1, seal the volume and listen for leaks. TIGHTChecker’s crystal-clear sound and vibrant color display pinpoints even the smallest leaks.

Affordable

With so many things to test, TIGHTChecker is in high demand. It’s low entry cost, versatility, and SDT quality make it the most affordable solution for testing everything that leaks. And everything leaks.

Speak with a Specialist about
Ultrasound Technology

Use the TIGHTChecker to pinpoint the exact location of leaks in vehicles, buildings, tanks, and ships. Designed for use with SDT’s ergonomic Flexible sensor and compact T-Sonic1 transmitter.

Downloads

TIGHTChecker Datasheet

TIGHTChecker Datasheet

TIGHTChecker Brochure

TIGHTChecker Brochure

TIGHTChecker Manual

TIGHTChecker Manual

TIGHTChecker Pictures

TIGHTChecker Pictures

Kit Content

The TIGHTChecker uses the Flexible Sensor

Tightchecker
Function Ultrasound measurement device Housing material ABS
Display 160×128 pixels Color OLED Dimensions housing 158 x 59 x 38.5 mm | 6.22” x 2.32” x 1.51”
Operable with SDT provided head set only Electrical connector 7-pole female LEMO
Minimum sensitivity -31dB (@40 kHz, 0 dB-1 V/µbar) Egal to a flow rate up to 10-3 std. cm3
/sec.		 Weight 164g | 5.78oz
Keyboard 5 function keys Battery 2 AA batteries
Measuring range -6 to 99.9 dBμV (reference 0 dB = 1 μV) Autonomy 4 hours
Resolution 0.1 dBμV Audio Amplification 5 adjustable positions by step of 6 dB
Measurement bandwidth 35 to 42 kHz Response time <9 milliseconds
Signal amplification +30 to +102 by step of 6 dB Maximum output +83dB SPL with SDT headset
Operating temperature range -10 to +50 °C |14 to 122°F Headset 25dB NRR Peltor HQ headset
IP rating IP42 Operable with SDT provided head set only