ISO CAT I, II & III Vibration Certification Training

In accordance with ISO 18436-1 & 18436-2

A new course designed to provide the fundamental tools to establish a successful vibration based monitoring program.

A fresh perspective on the practical concepts of vibration theory and application will be explored. When, where, why and how to use Displacement, Velocity and Acceleration vibration measurements are explored in detail. NEW Vibration Severity Charts and Setup Tables pave the way to Precision Database Setup.

ISO CAT I, II & III Vibration

These courses will not overwhelm the student with technical information on how the data is processed. The significance of spectrum frequencies and sideband frequencies are explored in detail, but how they are formed through the FFT process is omitted. Subjects such as time waveform theory and analysis, resonance and phase analysis are reserved for advanced seminars. However, experience has shown that these subjects add an unnecessary burden to someone trying to digest the basic information, and are of little value at this level.

After these seminars, the student will be competent to set up proper vibration measurement parameters for data collection, and basic vibration analysis and understand the variables that define these measurements.

SDT340 Brochure SDT340 Manual SDT340 Pictures SDT340 Softwares

On-board measurements
Ultrasound, Vibration, Infrared temperature and Tachometer.

Dual Sensor Inputs
One for ultrasound measurement and one for vibration.

Time signal and spectrum
On-screen time waveform and FFT. Panning and zooming for signal navigation. Display of the 10 highest values.

Frequency range
20 kHz to 50 kHz (ultrasound). 10 Hz to 10 kHz (vibration)

Sampling rate
32, 64, 128 and 256 kHz oversampling FocUS Mode

Signal length per recording
600 seconds (32 kHz sample rate) or 150 seconds (128 kHz focUS Mode )

Data memory
4.2 GB allowing the storage of 71 minutes of signal sampled at 128 kHz or 286 minutes at 32 kHz

Sensitivity
Class I instrument exceeding ASTM 1002-11 requirements for gas leak detection using the appropriate sensor.

Display
Full color TFT 3.5” screen 320×480. Active area: width 48.96 mm (1.93”) x height 73.44 mm (2.89”)

Bluetooth
For audio streaming

Housing
Extruded aluminum, shock proof rubber protections

Dimensions
L x W x H 221 x 93.5 x 44 mm (8.7 x 3.7 x 1.7 inches)

Weight
720 g (25.4 oz), including battery

Headphone
Wired headset and wireless Bluetooth headset. The SDT340 is compliant to noise exposure health and safety requirements when using SDT provided models